Trung tâm báo cháy network thông thường – Báo Khói, Báo Nhiệt
1. BEAM GST C-9105R
I-9105R Intelligent Reflective Beam Detector works on the principle of
reflective infrared beam smoke detector that can be directly
connected to a fire alarm loop. Transmitting status information via the
loop between the detector and controller. The detector must be used
together with a reflector. The number of reflector(s) to be used (one
or four) depends on the distance from the detector.
Built-in intelligent microprocessor, the detector has strong ability of
analysis and judgment. The detector automatically carries out system
adjustment, compensation and variation of ambient data.
Secure and speedy communication through the on board processor
enables the detector to make its own decision, resulting in greater
automation. The sensor and the panels utilized fuzzy logic providing
an almost limitless cause and effect scenarios
The detector is ideally suited to historical buildings, warehouses,
large storages, shopping malls, leisure centres, exhibition halls, hotel
lobbies, printing houses, clothing factories, museums and prisons, as
well as places where slight smoke particles or corrosive gas exist.
Wide monitoring area, range 8-100 metres
• Combination of the emitting and receiving parts makes
mounting easy and accurate optical pathway
• Simple and cost effective to install transmitter and reflective
via ‘honey comb’ mirror.
• Quick and easy to set up, visual strength indication.
• Built-in microprocessor
• Conventional System compatible
• Self-diagnosis function can monitor for internal faults
• Automatic compensation for factors weakening received
signals, such as dust contamination, positional movement
and ageing of the transmitter.
• Electronically addressed
• Two selectable levels of sensitivity adjustment.
• SMT processing technology
• Attractive and pleasing appearance
Đầu dò khói beam kính GST C-9105R
Xuất xứ: TQ
Bảo hành: 12 tháng
2. EST 281B-PL
280B-PL Series heat detectors offer fixed temperature or combination rate-of-rise and fixed temperature detection.
RATE-OF-RISE: A temperature increase at the sensor of 15°F (9°C) or more per minute activates the rate-of-rise feature. This closes the contacts in the sensor to transmit the alarm condition to the fire alarm control panel. When the rate-of-rise element alone has been activated, the sensor is self-restoring.
FIXED TEMPERATURE: If the temperature of the center disk rises to the sensor’s rated temperature, the fixed temperature element activates. This closes contacts in the sensor and transmits an alarm condition to the fire alarm control panel. The fixed temperature element is non-restorable and, when activated, the detector must be replaced. The need for replacement is indicated when the center disk has fallen free from the detecto t
- Origin: USA
- UL listed for 50 ft. (15.2m) spacing
- Single pole — normally open contact
- Low profile with mounting plate
- Pure white finish
- Mounting flexibility with screw terminals
- Easy twist-on installation
- On-site testing of rate-of-rise feature
- Positive operating indication — for fixed temperature element
Đầu dò khói nhiệt gia tăng cố định GE security sản phẩm của UTC
Xuất xứ: USA
Bảo hành: 12 tháng
3. SENSOR 1412B
All 400 Series ionization smoke detectors include a unique dual source, dual unipolar
chamber detection design which will sense the presence of smoke particles produced by
fast combustion as well as slow smoldering fires. This chamber exhibits increased stability,
significantly reduces nuisance alarms, and provides better performance at higher air
The 400 Series meets the performance criteria required by UL/ULC. Additional key
features include an LED which blinks in standby and latches on to indicate an alarm.
Detectors feature convenient field testing and sensitivity metering. The model 1400
includes remote LED annunciator capabilities using the RA400Z.
Đầu báo khói ion System sensor 1412B, sử dụng điện thế 12V
Smoke detector shall be an ionization type (model 1400, 1412B, or 1424) as manufactured
by System Sensor. Wiring connections shall be made by means of SEMS screws. Detector
will have a visible LED which will blink in standby and latch on in alarm. The detector
shall have a sensitivity of 1.9 ± 0.6%/ft. as measured in the UL smoke box. The detector
screen and cover should be easily removable for cleaning. It shall be possible to perform a
sensitivity and functional test on the detector without the need of generating smoke. The
detector shall have a mounting bracket that allows for mounting to a 31/2 ″ or 4″ octagon
box or 4″ square electrical box.
|Operating Voltage:||12 VDC (11.3-17.3 VDC)|
|Standby Current:||120 µA max.|
|Auxiliary Contact:||Form A, C|
|Auxiliary Contact Ratings:||2.0A @ 30 VAC/DC (Form A, C); 0.6A @ 110 VDC, 1.0A @ 125 VAC (Form C)|
|Temperature Range:||32° to 120°F (0° to 49°C)|
|Humidity Range:||10% to 93% RH, noncondensing|
|UL Listed Velocity Range:||1200 fpm max.|
|Sensitivity:||1.9% ± 0.6%/ft. nominal|
|Wiring Gauge:||12-22 AWG, twisted pair recommended|
|Dimensions:||3.12″ (8.1cm) H x 5.5″ (13.9cm) Dia.|
Xuất xứ: USA
Bảo hành: 12 tháng
4. SENSOR 5601P
135°F Fixed Temp/Rate-of-Rise, Single-Circuit Mechanical Heat Detector with Plain Housing
Multiple configurations for installations:
– Single- and dual-circuit models
– Fixed temp and combination fixed- temp/rate-of-rise
135°F or 194°F ratings.
Plain housing for residential installations (Model 5601P)
Easy-to-use terminal screws
A broad range of back box mounting options:
– Single gang
– 3.5˝ and 4˝ Octagonal
– 4˝ square with square to round plaster ring
Reversible mounting bracket
Đầu báo nhiệt gia tăng cố định ở 57 độ C, System sensor 5601P
Mechanical heat detector shall be a System Sensor 5600 series model number _________, listed to Underwriters Laboratories UL 521 for Heat Detectors for Fire
Protective Signaling Systems. The detector shall be either a single-circuit or a dual-circuit type, normally open. The detector shall be rated for activation at either
135°F (57°C) or 194°F (90°C), and shall activate by means of a fixed temperature thermal sensor, or a combination fixed temperature/rate-of-rise thermal sensor.
The rate-of-rise element shall be activated by a rapid rise in temperature, approximately 15°F (8.3°C) per minute. The detector shall include a reversible mounting
bracket for mounting to 3½-inch and 4-inch octagonal, single gang, and 4-inch square back boxes with a square to round plaster ring. Wiring connections shall
be made by means of SEMS screws that shall accommodate 14–22AWG wire. The detector shall contain alphanumeric markings on the exterior of the housing
to identify its temperature rating and activation method. The rate-of-rise element of combination fixed temperature/rate-of-rise models shall be restorable, to
allow for field-testing. The detectors shall include an external collector that shall drop upon activation to identify the unit in alarm.
|Heat Sensor:||135°F (57°C) fixed temperature, 15°F (8.3°C) per minute rate-of-rise|
|Wiring Gauge:||14-22 AWG|
|Dimensions:||1.69″ (4.3cm) H x 4.57″ (11.6cm) Dia.|
|Weight:||6 oz. (170 g)|
|3.5 inch Octagon:||Yes|
|4 inch Octagon:||Yes|
|4 inch Square:||Yes|
|Operating Humidity Range:||5 to 95% RH non-condensin|
Xuất xứ: USA
Bảo hành: 12 tháng
5. SIMON TX-6010-01-1
The TX Series supervised wireless smoke alarms are self-diagnostic and include an integrated Learn Mode 319.5MHz crystal transmitter. Features of the TX Series wireless smoke alarms include photoelectric technology, integral Temp 3 sounder, automatic drift compensation, replaceable optical chamber, low battery annunciation, status/sensitivity reading LED, mounting base tamper, and integrated fixed temp./ROR heat sensor. The TX Series wireless smoke alarms can be used with selected GE Security control panels, such as Simon and Concord and make the perfect fire/life safety add-on to a monitored security system.
- Self-Diagnostics reduces the chance of a nuisance alarm
- Replaceable optical chamber make cleaning a snap
- 2 3V Lithium batteries provide long battery life
- Automatic drift compensation reduces the chance of a nuisance alarm
- Learn mode feature reduces installation time
- Alarm signal sent to central station on test
- Low battery pre-alert sent to central station before sounder chirps
- Mounting base tamper sends trouble condition if smoke alarm is removed reducing liability
Đầu dò khói nhiệt không dây Simon TX-6010-01-1 sản phẩm của tập đoàn UTC